Small appliance housings and structural parts. Smaller housings still need clean surfaces and accurate assembly features, with multi-cavity layouts available for higher volumes.
Representative appliance housing mould.
| Applicable part | Small appliance housings and structural parts. |
|---|---|
| Cavities | 1–4 |
| Mould steel | P20 / S136 |
| Mould size | 400×400–900×700 mm |
| Mould weight | To be confirmed per project |
| Runner system | Cold or hot runner |
| Ejection | To be confirmed per project |
| Surface finish | To be confirmed per project |
| Machine tonnage | To be confirmed per project |
| Mould life | SPI class, graded by steel and structure; no fixed cycle count promised |
| Lead time | To be confirmed per project |
| Status | Example model — not a delivered product |
Generic grades only; final grade is confirmed per part drawing.
Typical materials are PP, ABS, HIPS and PC, chosen by part size and surface requirement: PP and HIPS for large housings, ABS and PC where impact strength and finish matter. Final grade is confirmed per part drawing.
Large housings need even wall thickness and controlled shrinkage across wide, visible surfaces, with ribs and bosses placed for strength without sink marks. Trial checks cover size, fit and surface before the mould is accepted.
Model: JZ-HA-202. Tell us about your part and requirements.
Phone / WhatsApp: +86 158 5037 4308
Drawings (STEP, IGES, STL or 2D) can be sent via WhatsApp or WeChat.
To quote this mould, please include:
Related Products
