Large appliance housings such as washing machine and refrigerator parts. Large housings need even walls and controlled shrinkage across wide surfaces, with ribs and mounting points reviewed at DFM stage.
Representative appliance housing mould.
| Applicable part | Large appliance housings such as washing machine and refrigerator parts. |
|---|---|
| Cavities | 1–2 |
| Mould steel | P20 / 718 |
| Mould size | 800×800–1400×1000 mm |
| Mould weight | To be confirmed per project |
| Runner system | Hot runner |
| Ejection | To be confirmed per project |
| Surface finish | To be confirmed per project |
| Machine tonnage | To be confirmed per project |
| Mould life | SPI class, graded by steel and structure; no fixed cycle count promised |
| Lead time | To be confirmed per project |
| Status | Example model — not a delivered product |
Generic grades only; final grade is confirmed per part drawing.
Typical materials are PP, ABS, HIPS and PC, chosen by part size and surface requirement: PP and HIPS for large housings, ABS and PC where impact strength and finish matter. Final grade is confirmed per part drawing.
Large housings need even wall thickness and controlled shrinkage across wide, visible surfaces, with ribs and bosses placed for strength without sink marks. Trial checks cover size, fit and surface before the mould is accepted.
Model: JZ-HA-101. Tell us about your part and requirements.
Phone / WhatsApp: +86 158 5037 4308
Drawings (STEP, IGES, STL or 2D) can be sent via WhatsApp or WeChat.
To quote this mould, please include:
Related Products
