Home / Moulds / Automotive Moulds / JZ-AU-101

JZ-AU-101 Automotive Bumper Mould

Large exterior parts such as bumpers, door panels and exterior trim. Large moulds in this range call for careful control of size, surface and fit across long, visible parts — grained or high-gloss finishes are specified per part, and hot-runner gating is typical for large single- and twin-cavity layouts.

Representative exterior trim product.

Specifications

Applicable part	Large exterior parts such as bumpers and door panels.
Cavities	1–2
Mould steel	P20 / 718
Mould size	800×800–1600×1200 mm
Mould weight	To be confirmed per project
Runner system	Hot runner
Ejection	To be confirmed per project
Surface finish	To be confirmed per project
Machine tonnage	To be confirmed per project
Mould life	SPI class, graded by steel and structure; no fixed cycle count promised
Lead time	To be confirmed per project
Status	Example model — not a delivered product

Materials & Process

Generic grades only; final grade is confirmed per part drawing.

PPABSPC/ABSPA

Typical part materials in this range are PP, ABS, PC/ABS and PA, selected by part function: PP for large exterior panels, ABS and PC/ABS for interior trim, PA where strength and heat resistance matter, and clear PC grades for lamp lenses. Final grade, wall thickness and shrinkage are confirmed against the part drawing.

Moulds in this range are built for visible surfaces and tight fit: grained or high-gloss finishes as specified, hot-runner gating for large parts, and dimensional checks at trial — including blue-light scanning where the part requires it. Where a part needs a finished surface, painting, laser etching, printing, PVD or UV can follow moulding, with assembly completing the chain.