Gears and precision structural parts. Gear moulds need accurate tooth profiles and stable dimensions, with materials selected for wear and mechanical load.
Representative precision product.
| Applicable part | Gears and precision structural parts. |
|---|---|
| Cavities | 2–16 |
| Mould steel | S136 / 718 |
| Mould size | 250×250–700×700 mm |
| Mould weight | To be confirmed per project |
| Runner system | Hot runner |
| Ejection | To be confirmed per project |
| Surface finish | To be confirmed per project |
| Machine tonnage | To be confirmed per project |
| Mould life | SPI class, graded by steel and structure; no fixed cycle count promised |
| Lead time | To be confirmed per project |
| Status | Example model — not a delivered product |
Generic grades only; final grade is confirmed per part drawing.
Typical materials are POM, PA, PC, PBT and LCP, selected by mechanical, thermal and electrical requirements: POM and PA for gears and moving parts, PC and PBT for housings, LCP for fine-pitch, heat-resistant components. Final grade is confirmed per part drawing.
Precision work starts with the drawing: tolerances, datum surfaces and critical dimensions are reviewed before steel is cut, and trial parts are measured against them. Complex structures — including two-colour parts and printing on soft plastics — are reviewed as a complete process, not as separate steps.
Model: JZ-PR-202. Tell us about your part and requirements.
Phone / WhatsApp: +86 158 5037 4308
Drawings (STEP, IGES, STL or 2D) can be sent via WhatsApp or WeChat.
To quote this mould, please include:
