Thin-wall containers. Thin-wall moulds run at high speed with many cavities, so filling balance, rapid cooling and polished cavities matter most.
Representative packaging mould.
| Applicable part | Thin-wall containers. |
|---|---|
| Cavities | 1–12 |
| Mould steel | S136 / 718 |
| Mould size | 400×400–900×900 mm |
| Mould weight | To be confirmed per project |
| Runner system | Hot runner |
| Ejection | To be confirmed per project |
| Surface finish | To be confirmed per project |
| Machine tonnage | To be confirmed per project |
| Mould life | SPI class, graded by steel and structure; no fixed cycle count promised |
| Lead time | To be confirmed per project |
| Status | Example model — not a delivered product |
Generic grades only; final grade is confirmed per part drawing.
Typical materials are PP, PE and PET: PP for most thin-wall containers and closures, PE for crates and flexible parts, PET where clarity and barrier matter. Final grade is confirmed per part drawing.
Thin-wall parts need fast, balanced filling and rapid cooling, with polished cavities for clean release and a clear surface. Cap moulds add unscrewing or collapsing-core actions where the closure thread requires it; crate moulds need strong, even walls for stacking loads.
Model: JZ-PK-101. Tell us about your part and requirements.
Phone / WhatsApp: +86 158 5037 4308
Drawings (STEP, IGES, STL or 2D) can be sent via WhatsApp or WeChat.
To quote this mould, please include:
Related Products
